Save space and money with the Pendu notcher-stacker combination machine! Instead of having a notcher with a stacker behind it for stringer boards and another stacker with a bypass around the notcher for when you want to just stack boards, the notcher-stacker combination allows you to do the same thing without the extra stacker.
The Pendu notcher-stacker combo machine provides the versatility for you to notch stringers and send them straight to the stacker, or simply lower the top bypass conveyor and bypass the notcher to send un-notched stringers and deck boards to the same stacker. Notch up to 7000 stringers per hour and stack up to 25 layers per minute with the notcher-stacker combo.
6700PB NOTCHER COMBO:
Material capacity
1″ x 3 1/2″ up to 2″ x 4″
Material lengths
Board Lengths 36″ to 72″
Distance between notches
6″ to 36″
Notch depth
Up to 2.5″
Notch width
up to 9″
Notching rate
Up to 7000 stringers/hour
Pit-unscrambler
60 Degree incline, (3) strands of 2060 chain with lugs, Adjustable lug height, Hand crank adjustment for the self centering material guides, 2 HP Electric drive (Requires vfd)
Top deck
(4) strand 2060 chain deck to feed into magazine. Automatic shutoff when magazine if full
Top bypass for boards
(2) strand #50 chain 1-1/2 HP electric drive (Requires VFD) lift assembly with hydraulic cylinder and hand pump, 28" to 72" long material
Pusher
Cam feed with 2 HP electric drive (Requires VFD)
Arbors
2 1/4″ diameter
Cutter heads
12" diameter with indexing carbide tips, 1/2" radius standard (1-1/2" radius optional upon request)
Cutter drive
Two 30 HP electric motors
Head adjustment
In and out, up and down directions done with hand crank
Waste removal
One 12" O.D. bottom dust outlet (Auger assembly optional)
4700 STACKER COMBO:
Layers per minute
Up to 25 layers per minute
Material capacity
3/8" To 2" thick, 2" To 6" wide and 28" Inches to 72 inches long
Incline conveyor
(Replaces the pit for use with notcher) (2) incline lugged chains, 1 HP electric drive (Requires VFD) (2) even ending belts driven from stacker chains, Hydraulic drive to move transfers-use HPU from stacker
Accumulating chain
Strands move with stacker strands, each strand with fixed driven even-ending belt, Two 1 HP electric drives (Requires VFD)
Tie strip placer
Two adjustable automatic stick magazines with programable placements
Stacker chain
Two 1 HP electric drives (Requires VFD). Manual width adjustment, Air cylinder escapement
Top hold down
Automatically actuated by air cylinder, Applies down pressure during the layer escapement cycle
Stack lowering
Automatic Lowering table, Hydraulic cylinder's and chain actuation (6000 lb. capacity). Includes hydraulic pump with 5 HP electric motor
Pac tamper
Pneumatically actuated, Keeps light pine material compacted during the stacking process for uniform finished bundles.
Takeaway rollers
High speed driven takeaway rollers, 12' long live roller outfeed. (6' inside stacker & 6' outside stacker) each section with 1 HP electric drive and VFD. Includes 7' of gravity rolls outside of stacker.
Controls
PLC controlled with touch screen, includes ewon for remote access.
Air requirments
80 PSI, 3 CFM
Get the Pendu difference today and achieve the production you deserve tomorrow.
Inquire Now